Robotic Inter Partition Welding Machine :
(It is also called Through the Partition Welding Machine)
Double Arms Movement
For forging, we have designed better Forging Head. This head has double arms movement and self-centering arms, which intelligently rotates for N-120, N-150, N-200 etc. batteries. It will exactly match the center of partition. Hence our design is far ahead of other machine available nationally or internationally.
Transformer
Current source of Machine is state of art heavy transformer of 65 KVA rating. We use best quality of copper, which dissipates lesser heat. So machine does not waste Costly electricity in the form of heat. Only Air-cooling is sufficient. If water-cooling is used it will increase running load of pump and wastewater, which is also becoming precious and harming to environment so our machine is environment friendly. At the same time reducing running cost of machine.
Welding Current Controller
Design of Welding Controller is operator friendly. Operator can Select Size of Battery Directly and once selected all the stored values are set automatically. Operator can also set and see all parameters such as Squeeze Time, Weld Time, Cooling Time and required Current as per battery size, which can be programmed respectively for battery size and recall whenever that size of battery is made. He can also communicate if any of the problems arises so he could be guided directly without physically present on the machine.
Rotational Movement will reduce Cycle Time for N-120, N150, N-200 etc.
Operation of machine is automatic for each weld. In other words, Operator has to press single push button for one cycle in which one weld is performed which connects two cells through the partition. One cycle includes Down command Squeeze Command, Weld Command, Open command, Up Command & if required to rotate clockwise/ anticlockwise. Hence Operator needs not to think for operation of machine so maximum out in minimum time has been achieved. It intelligently does all the five weld in one go irrespective of size of the battery. Need not to move battery, Machine does all the welding so job of operator is reduced, He can operate another machine, which also has single push button start.
This Machine can connect for total automatic operation also with Three Head Model or this can be provided Servo Operated Model.
