This machine connects cells through the partition of container. This Machine forges L- connecter of cells through the hole of partition together and passes heavy current at low voltage so portion of these connecter through hole of partition melts, taking advantage of resistance of lead, and become single entity. This machine do mass production and running cost comes to minimum, hence cost per battery is reduced to minimum.

Double Arms Movement - For forging, we have designed better Forging Head.  This head has double arms movement and self-centering arms which intelligently rotates for N-120, N-150, N-200 etc. batteries. It will exactly match the center of partition. Hence our design is far ahead of other machine available nationally or internationally.

Transformer - Current source of Machine is state of art heavy transformer of 65 KVA rating. We use best quality of copper which dissipates lesser heat. So machine does not waste costly electricity in the form of heat. Only air cooling is sufficient. If water cooling is used it will increase running load of pump and waste water which is also becoming precious and harming to environment so our machine is environment friendly. At the same time reducing running cost of machine.

Welding Current Controller - It is designed indigenously as per need of our operator. Operator can set and see all parameters such as squeeze time, weld time, cooling time and required current as per battery size which can be programmed respectively for battery size and recall whenever that size of battery is made. Operator can also see which operating time has been lapsed which other controllers do not provide. He can also communicate if any of the problems so he could be guided directly by the service engineer without physically present on the machine.